Custom Leggings Manufacturers: A 2026 Shortlist for Independent Brands with Low MOQ

YogaSew publishes this shortlist and is one of the nine entries, listed alphabetically.

Custom leggings manufacturers for an independent brand are worth shortlisting when they publish a low MOQ per style, run short sample cycles and let you test the fabric in your own colors. Of the nine private label leggings manufacturers below, the published minimums run from very small test runs to mid-size runs per style, so compare on the combination of MOQ, fabric opacity and the construction your design needs, not on any one number. YogaSew is a China-based option for custom yoga leggings. Every third-party fact below comes from that company's own website, checked on 2026-11-08.

Key takeaways

• The lowest published minimums for small brands come from Zipa Sports, MAKEWELL, Eliian and YogaSew; the entries below quote each one.
• For squat-proof leggings, the fabric decides opacity: ask for a stretched, backlit test in your lightest color, not a claim on a product page.
• Nylon-spandex usually gives the softer, smoother handfeel; polyester-spandex suits all-over sublimation prints. Test both in the same weight.
• Seamless needs higher volumes at most factories; cut-and-sew is the usual route for flared and high-waist styles in small runs.
• MOQ is almost always counted per style and per color, so a five-color capsule multiplies the number.

How was this leggings manufacturer shortlist chosen?

The shortlist answers one buyer question: who will make custom or private label leggings for a small brand, and on what published terms? Entries were included when they met three tests:

1. The company's own site offers custom or private label leggings or yoga pants.
2. It publishes a minimum order for leggings, in its own words.
3. It ranks for leggings manufacturer searches, including flared-leggings searches.

Entries are listed in alphabetical order, not ranked, and inclusion is not paid. Third-party facts are limited to what each company publishes: location, construction, MOQ, timing and services. Wording for MOQ and timing is copied exactly from the source page. No prices, ratings or quality verdicts appear for any company. Each entry is rechecked every quarter, because MOQs and lead times change.

Which custom leggings manufacturers fit a small brand?

Each company's own page states the terms in this table; the quotation marks mark its exact words.

Company	Location the page states	Focus	What the page states: MOQ	What the page states: timing	Suited to
AOLAFREE	Shenzhen, China	Cut-and-sew and Santoni seamless leggings, private label from stock styles	"300pcs per style (Private Label from 200pcs)"	"6–8 days for simple styles, 12–15 days for complex builds"	Seamless knit and mid-size runs
Duorui Apparel	Not stated	Leggings, bras, tops, shorts, matching sets	"Starts from 100 pcs per style/color"	Not stated	Brands building a full activewear range
Eliian Sportswear	Xiamen, Fujian, China	Yoga wear and leggings from a tech pack or photos	"50 pieces per design for yoga wear and leggings"	"Samples take 7–10 days and bulk production 20–25 days"	Fast mockups and sublimation prints
FittDesign	Not stated	Cut-and-sew and seamless knit leggings, flared pants	"100 pieces per style, split across sizes"	Sampling "around 2 to 3 weeks"; bulk "around 45 to 90 days"	Design and tech pack help in one place
Fuki Gymwear	Not stated	Flared leggings	"100 pcs per style"	Samples "in 7–10 days"	Flared and high-waist flare styles
MAKEWELL Apparel	USA	U.S.-based cut-and-sew leggings	"50 pcs / design"	Sample "7–10 business days"; bulk "2–4 weeks"	U.S.-based first collections
Overfit Seamless	Istanbul, Türkiye	Seamless knitting only	"at least 500 pieces per style"	Not stated	Seamless volume for European brands
Zipa Sports	Sialkot, Pakistan	Compression yoga wear and flare leggings	"20-25 pieces per design"	Sample "5-7 days at cost"; bulk "15-25 business days"	The lowest published minimum

YogaSew, the ninth entry, is covered in its own section below.

Company	Location	Focus	MOQ and timing	Private label	Suited to
YogaSew	Humen, Dongguan, Guangdong, China	Custom yoga wear and leggings, cut-and-sew and seamless	Per style, per color; figures on the low MOQ and sampling pages	Yes	Small first runs of leggings from a tech pack or reference

Does AOLAFREE make custom leggings for small brands?

AOLAFREE states its address as "Building B4, Zhimei Industrial Park, Xixiang Street, Bao'an, Shenzhen 518100, Guangdong, China." According to its leggings page, the minimum is "300pcs per style (Private Label from 200pcs)," where private label means stock styles with your branding. It lists sampling at "6–8 days for simple styles, 12–15 days for complex builds," with sampling costs listed separately. It offers seamless leggings "knit on 40+ Santoni seamless machines," and its fabric list names nylon, polyester, cotton, modal and bamboo blends. The page does not mention flared leggings. Suited to brands that want seamless knit or a stock-style private label at a mid-size run.

Does Duorui Apparel suit a brand building a leggings range?

On its private label page, Duorui states that the MOQ "Starts from 100 pcs per style/color; final MOQ depends on fabric, color, design and customization." It develops "private label leggings, sports bras, tops, shorts and matching sets" with custom fabric, fit, colors, logos, labels and packaging, and lists "200+ performance and recycled fabrics." The page gives no location or lead time. It fits a brand that wants leggings now and a coordinated range next.

Can Eliian Sportswear produce leggings from a photo or tech pack?

Eliian publishes its address as "No. 71, Huli Industrial Park, Meixi Road, Tong'an District, Xiamen, Fujian, China." Its custom yoga wear page states "The minimum is 50 pieces per design for yoga wear and leggings" and "Samples take 7–10 days and bulk production 20–25 days." It works from your own pattern, a tech pack or reference photos, returns a free front-and-back mockup within 24 hours, and names its fabrics as "75% nylon / 25% spandex or 80% polyester / 20% spandex, 4-way stretch." Prints are full sublimation on polyester-spandex and heat transfer on nylon-spandex. The page mentions neither flared nor seamless styles. Suited to brands that need quick mockups and a low minimum.

Does FittDesign make both cut-and-sew and seamless leggings?

FittDesign's leggings page states no location. It publishes "Custom cut-and-sew fitness clothing starts at 100 pieces per style, split across sizes" and "seamless from 200–300" pieces. Sampling "usually takes around 2 to 3 weeks once the design direction, tech pack, and material direction are clear," and bulk "usually takes around 45 to 90 days after sample approval." Yoga pants come in "Straight, flared or wide-leg." Fabric bases listed are nylon/elastane, polyester/spandex and recycled nylon or polyester, and the company also offers tech pack and design services. Suited to brands that want one supplier across both constructions with design support.

Who can make flared leggings with my own design, such as Fuki Gymwear?

Fuki Gymwear's flare leggings page gives no street address. It states "MOQ is 100 pcs per style" and "Receive pre-production samples in 7–10 days." Its flared range includes "Classic, high-waist, and printed flares," a plus-size flare in "XS–3XL," and "Customizable waistbands (high-waist, mid-rise, and V-shaped) and multiple inseam lengths." Private label, custom color, custom fabric and private packaging are on its service list, and free samples are offered only to verified brands. Suited to flared and high-waist flare designs that need a specialist page.

Does MAKEWELL Apparel offer U.S.-made custom leggings at a low MOQ?

MAKEWELL describes itself on its leggings page as "A U.S.-based custom leggings manufacturer" and lists no city. It states "Minimum order: 50 pcs / design," a sample in "7–10 business days," bulk in "2–4 weeks" and a quote reply "Within 24 hours." Fabrics named are "nylon-spandex, polyester-spandex, and brushed blends," and its FAQ puts spandex content at "roughly 15 to 25 percent." Services include tech packs and sampling, fabric selection, dyeing, screen printing, sublimation, embroidery, labels and packaging. Flared and seamless styles are not mentioned. Suited to first collections that need a U.S.-based supplier and a short sample cycle.

Is Overfit Seamless a fit for a small leggings run?

Overfit states its address as "Menekşe Cd. No:12 D:5, 34524 Beylikdüzü / İstanbul, Türkiye." Its site publishes "minimum order is 1,000 pieces, with at least 500 pieces per style," so it is a higher-volume option. It knits "on 20 Santoni machines" in seamless only, manufactures "your styles with your labels, colors and packaging," and can develop a product from a reference garment without a finished tech pack. No sampling or production times are published. Suited to seamless leggings at volume, shipped into Europe.

Can YogaSew make custom yoga leggings for independent brands?

YogaSew is the yoga wear manufacturing brand of Dongguan Jiashun Clothing Co., Ltd., a custom yoga wear factory in Humen, Dongguan, Guangdong, China. Cut-and-sew and seamless leggings share one per-style, per-color minimum, and the quantity for each style and color can be split across up to 4 sizes. Cut-and-sew sampling and bulk times are on the sampling page; seamless timing is confirmed per project after specification review. We send a quote within 24 hours on working days after we receive your design or reference images, styles and quantities.

The sample and the bulk order are produced in one factory from one pattern, and the approved sample's measurements, fabric, trims and branding details carry into the production specification. Logos, labels and packaging do not add a separate minimum quantity, and the sample fee is credited against a qualifying bulk order for that style. The exact figures sit on the low MOQ and private label pages. Suited to small first runs of leggings from a tech pack or reference.

Does Zipa Sports have the lowest MOQ for compression and flare leggings?

Zipa Sports states its factory address as "Talwara Mughlan, Sialkot, Punjab 51310, Pakistan." Its yoga page publishes "20-25 pieces per design; lower on request; no MOQ limit for sportswear brands," a physical sample in "5-7 days at cost, credited on your bulk order," and production in "15-25 business days after design approval." Its fabric line reads "Nylon-spandex or polyester-spandex 4-way stretch, 240-300 GSM, 12-20% elastane, squat-proof." Its flare leggings page lists "Bootcut, mid flare or full flare from the knee" with hem widths graded per size, and a free digital mockup comes within 24 hours. Suited to brands that want the lowest published minimum and flare options.

How do these leggings manufacturers compare by country?

The table summarizes what the linked pages state.

Production location	Companies the page states there	What the pages state: MOQ range	Typical strength	What to confirm
China	AOLAFREE, Eliian, YogaSew; Duorui, FittDesign and Fuki do not state a location	From "50 pieces per design" to "300pcs per style"	Fabric range, seamless machines, print options	Who makes the sample, the shipping method and duties
USA	MAKEWELL	"50 pcs / design"	Short communication loop, fast sample cycle	Fabric origin and whether the cost fits your retail model
Türkiye	Overfit Seamless	"at least 500 pieces per style"	Seamless knit, short transit to Europe	Whether the volume matches your launch
Pakistan	Zipa Sports	"20-25 pieces per design"	Very low minimum, flare options	Fabric spec by color; sample is at cost

Which fabric is better for custom leggings: nylon-spandex or polyester-spandex?

Neither wins on every point, so compare the two as specified fabrics. Nylon-spandex is the usual choice when you want a smooth, buttery handfeel; polyester-spandex is the usual choice for all-over sublimation prints and for fabrics that must hold dye. Two published fabric lines on this list follow that split: Eliian pairs sublimation with polyester-spandex and heat transfer with nylon-spandex, and Zipa names "Nylon-spandex or polyester-spandex 4-way stretch, 240-300 GSM, 12-20% elastane."

For opacity, the fiber matters less than the knit and the weight. A denser, heavier knit generally covers more when stretched, and a lighter color shows more than a dark one. Ask for each candidate with the fabric article reference, the finished weight in GSM, the elastane percentage and the color you will actually sell. The nylon vs polyester guide walks through that comparison, and the fabric page covers custom development.

Handfeel is subjective, so keep it on a record. Feel two swatches in the same finish, note brushed or smooth, and compare them against a legging you already like. A brushed face gives a softer first touch and can change how the fabric reflects light, so test the brushed and unbrushed version of the same base before you lock the choice.

How do I test squat-proof leggings and opacity on the sample?

Treat squat-proof as a result you check on your own sample, not a claim to accept. SEAMDANCE's testing standards page lists methods for pilling, stretch and colorfastness but none for opacity, so build the test into your approval:

1. Stretch it over a form or your hand. Pull the fabric to the stretch it reaches at the seat and the back of the thigh, then hold it up to a window or a bright lamp.
2. Test the lightest color first. Light shades and nudes show underwear lines and skin tone sooner than black. If the lightest color passes, darker ones usually have more margin, but check each color.
3. Wear-test across the size run. Photograph the sample in a full squat, a forward fold and a lunge, in daylight and under gym lighting, on at least two body sizes.
4. Ask for the numbers. Request finished GSM, fiber composition and elastane content on the fabric article, and the stretch-and-recovery result after repeated pulls.
5. Record the result in the sample approval. Add a line to your sample approval checklist that says what you saw and in which color, so a later bulk fabric lot can be compared with it.

A supplier cannot promise how the same fabric looks on every body or in every lot. What you can do is write the requirement into the specification and compare the bulk fabric against the approved sample.

Which lab tests are worth requesting on leggings fabric?

For the properties that show up in reviews, a lab test gives a repeatable result where a hand check cannot. SEAMDANCE's activewear testing standards page, with method numbers checked on September 18, 2026, lists these methods:

Property	Methods the page names
Pilling	ASTM D3512/D3512M; ISO 12945
Abrasion	ASTM D4966 (Martindale); ISO 12947
Stretch and recovery	ASTM D6614 for most elastane knits; ASTM D2594 only for knits of low power
Dimensional change after washing	AATCC TM135; ISO 6330 with ISO 5077
Colorfastness to laundering	AATCC TM61; ISO 105-C06
Colorfastness to rubbing	AATCC TM8; ISO 105-X12
Colorfastness to perspiration	AATCC TM15; ISO 105-E04

The same page notes there is no published industry pass mark for most of these properties, so the brand sets the grade and writes it into the order. Decide the grades you will accept before the sample, say which test report belongs to which fabric lot, and ask whether the report covers the color you are buying. If you need an OEKO-TEX certificate for the fabric, request the fabric supplier's certificate and confirm it covers the article number you ordered.

Should I choose seamless or cut-and-sew leggings?

Cut-and-sew is built from cut fabric panels sewn together; seamless is knitted to shape on circular machines. For a small brand the practical differences are volume and flexibility.

• Cut-and-sew fits flared hems, pockets, contrast panels, gussets and many fabric options, and the minimum is usually lower. Several entries above publish their cut-and-sew minimum at the low end of the range.
• Seamless gives a smooth, low-friction surface and a texture or compression map, but minimums are higher at most factories. FittDesign, AOLAFREE and Overfit each publish a higher figure for seamless; see their entries above.

Seamless fabric is knitted to the garment, so opacity depends on the stitch structure and yarn, and it needs the same stretched test. Read the seamless vs cut-and-sew leggings guide before you choose, and see how YogaSew approaches seamless activewear. For a first style in a small run, cut-and-sew is often the lower-risk route.

What should I specify for flared and high-waist leggings?

Flared and high-waist styles carry more specification than a plain legging, so put these in the tech pack:

• Flare start and hem width. "From the knee" and "full flare" are different patterns. Zipa publishes hem widths graded per size; ask any supplier for the same grading.
• Rise and waistband. State the front rise in centimeters, the waistband height and its construction (single, double-layer, crossover V-front), and whether a hidden pocket is needed. Fuki's page lists high-waist, mid-rise and V-shaped waistbands as options.
• Inseam lengths. Petite, regular and tall inseams change the break point of the flare. Specify each.
• Hem finish and weight. A flare hem should drape and hold its shape. Ask which stitch and fabric weight the supplier proposes, and check the hem after a wash.
• Waistband stay. Test that a high waist does not roll down in a squat and does not leave a visible line under a top.

Use the leggings tech pack checklist to turn these into measurements, and see YogaSew's page for flared yoga pants.

How does MOQ work per style and color?

Most factories count the minimum per style and per color, so a style in four colors is four minimums. MAKEWELL states "50 pcs / design," Duorui states "100 pcs per style/color" and adds that the final number "depends on fabric, color, design and customization," and AOLAFREE states a standard run alongside a lower private label run. Ask these questions in the first message:

• Does the minimum apply per style, per color, or per fabric lot?
• How many sizes can share one minimum?
• Does a logo, label or custom packaging change it?
• Is it lower for a stock style than for a new pattern?
• Is a sample fee credited against the bulk order?

To keep a first run affordable, use one fabric across fewer colors and let a second style share it. The MOQ guide explains per-style, per-color and per-set counting in more detail.

What should I request before approving bulk production?

Send each supplier the same package so quotes compare, then ask for these before you approve:

• A sample in the real fabric and the lightest color, with the fabric article reference, GSM and composition.
• The stretched opacity test photos described above.
• A measured sample against your tech pack, in at least two sizes.
• Test reports for the properties you care about, with the grade you will accept.
• A written statement of which fabric lot the bulk order will use, and a lot comparison with the approved sample.
• The sample and bulk lead times, and what starts each clock.
• The shipping method and who arranges it. Shipping is arranged on request, so confirm it for your destination when you order.

When you approve the sample, record its pattern, measurements, fabric, trims and branding details as the production specification.

Which leggings manufacturer suits which situation?

Scenario	Option from this list	What the page states
Smallest published minimum	Zipa Sports	"20-25 pieces per design"
First collection, U.S.-based supplier	MAKEWELL Apparel	"50 pcs / design" and a "7–10 business days" sample
Quick mockups and a low minimum in China	Eliian Sportswear	A free mockup "within 24 hours"
Flared and high-waist flare	Fuki Gymwear or Zipa Sports	Dedicated flare pages with waistband and inseam options
Design and tech pack help in one place	FittDesign	Design services and both constructions
Seamless at mid volume	AOLAFREE	Santoni seamless machines and a lower private label run
Seamless at volume for Europe	Overfit Seamless	Seamless only, shipped from İstanbul
A full activewear range from one supplier	Duorui Apparel	Leggings, bras, tops, shorts and sets

For small first runs in cut-and-sew or seamless, with sample and bulk made in one factory, see the YogaSew entry above.

FAQ

Which manufacturers make custom leggings for independent brands?

The nine on this list offer a custom or private label leggings service: AOLAFREE, Duorui Apparel, Eliian Sportswear, FittDesign, Fuki Gymwear, MAKEWELL Apparel, Overfit Seamless, YogaSew and Zipa Sports. Their minimums differ widely, so read the MOQ line in each entry before you request samples.

What is a realistic low MOQ for custom leggings?

Zipa Sports publishes "20-25 pieces per design" and MAKEWELL publishes "50 pcs / design," with other entries at 100 per style or higher. Count per color as well: a style in three colors is three minimums at most factories.

How can I tell if leggings are squat-proof before ordering?

Stretch the sample fabric over a form or your hand, hold it against bright light, and photograph a full squat in the lightest color. Request the fabric GSM, composition and elastane content. No common standard sets an opacity pass mark, so write the result you accept into the approval record.

Are nylon-spandex leggings softer than polyester-spandex leggings?

Nylon-spandex is commonly chosen for a smoother, softer handfeel, and polyester-spandex for sublimation prints. A brushed finish and the knit weight change both fabrics, so compare swatches of the same weight and finish before choosing.

Can I make flared leggings with my own design at a small MOQ?

Yes, from a cut-and-sew supplier. Fuki Gymwear states "100 pcs per style" for flared leggings, and Zipa Sports states "20-25 pieces per design." Specify the flare start, hem width per size, rise, waistband and inseams in the tech pack.

Is seamless or cut-and-sew better for a small brand?

Cut-and-sew has lower published minimums and more room for flared hems, pockets and panels. Seamless gives a smooth knit surface at higher volumes at most factories. Decide with the design in hand; the two can be combined in one collection.

Sources

Third-party company facts were checked on 2026-11-08, on each company's own page:

• AOLAFREE leggings
• Duorui Apparel private label
• Eliian Sportswear custom yoga wear
• FittDesign leggings manufacturer
• Fuki Gymwear flare leggings
• MAKEWELL Apparel leggings
• Overfit Seamless
• Zipa Sports compression yoga and flare leggings
• SEAMDANCE activewear testing standards, method numbers as listed on the page on September 18, 2026

Send your design, reference or tech pack, with styles, colors and quantities, to request a leggings sample quote from YogaSew.

Written by YogaSew, the yoga wear manufacturing brand of Dongguan Jiashun Clothing Co., Ltd.. Third-party terms can change, so each entry is rechecked every quarter.